Hi all,
I've got a weaver deck hatch which is leaking at the handles. Most probably a simple o ring replacement.
Now every other brand of hatch seems to have an obvious screw. I can't see how these handles come apart.
Anyone got any ideas or had experience.
As ever , thank you for your help.
Cheers
Bristol
I suspect the screw will be under the slide lock. Probably need to prise the slide out with a flat screw driver.
Weaver are now part of Maxwell / Vetus in NZ, so perhaps you could try contacting them using the following link.
www.maxwellmarine.com/find_enquiry.php
Hi all,
I've got a weaver deck hatch which is leaking at the handles. Most probably a simple o ring replacement.
Now every other brand of hatch seems to have an obvious screw. I can't see how these handles come apart.
Anyone got any ideas or had experience.
As ever , thank you for your help.
Cheers
Bristol
I have the same problem with my lewmar hatches.
It is more a washer then an o ring could not get anything except buying the whole handle.
I have ended up using the washer for a small tap you know the screw on click n for the hose. Not the larger usuall one but the smaller one that comes with it.
Hi all,
I've got a weaver deck hatch which is leaking at the handles. Most probably a simple o ring replacement.
Now every other brand of hatch seems to have an obvious screw. I can't see how these handles come apart.
Anyone got any ideas or had experience.
As ever , thank you for your help.
Cheers
Bristol
I have the same problem with my lewmar hatches.
It is more a washer then an o ring could not get anything except buying the whole handle.
I have ended up using the washer for a small tap you know the screw on click n for the hose. Not the larger usuall one but the smaller one that comes with it.
Thanks for asking DAMA, but you've caught me out - still haven't got round to them. Just relying on the fact that the dinghy sits over the hatch.
However, you've inspired me. As soon as it stops raining.......!
Bristol