Colour meanings and using Google Earth with ka72

I got an email this evening from someone wanting a reminder about Google Earth and the colours used in ka72.com overlays.

I typed out a long reply, but it bounced back "sender unknown" so rather than waste my effort I'll post it here (and hope that "Geoff" sees it here.)
-----
I can't remember the colour codes offhand (red is the 2s peak, I remember that!) but you can work it out if you have Google Earth handy. (And I've worked out the colour codes too, so you can skip the guff and jump to the end if you just want the answer quickly)

Open the overlay page (for example: http://www.ka72.com/viewge.aspx?fid=23830&tid=0 ) then click the link at the bottom of the image to download the file.

Open the downloaded file in Google Earth.

If you have a fairly recent version of Google Earth, then you should see a section called "Places" on the left edge of your screen. (If you don't see it, on the program menu, click "View", "Sidebar" and it should pop up.)

Under "Places" there will be "Temporary Places" and under that "KA72 Results." If you click the little triangle next to "KA72 Results" you will see a list pop down of your results, and the colour of each result is next to the figure. You can use the checkboxes here to show and hide individual results, for instance, if you want to focus on your Alpha and make sure that it is a valid-looking shape, you can uncheck everything except the alpha result, and double-click on that to zoom to it.

Now that I'm there, I can see the 2s peak is red, the 100m is cyan, the 5x10s are black, the Alpha is green, the nm is sort of dark greeny blue, and the 1hr is white (so it doesn't really show, but you can still show ONLY the 1hr, and then focus on that segment in Google Earth.)

Hope that helps!

Cheers,

Dylan.

Thanks I will pass that info on to Jeff as he was asking me about it the other day