Very sorry if this has been covered before,but just wondering if anyone has had continuing
Fails with trying to format a card to a new gt31 that uses the latest software version v1.4 (B0803T).
On start up I get a message 'bad format'
Followed by
[-32768.12h]
Then a series of
Secondary messages
[-1.bbh]
And
[S:0]
Got to mention I have tried 4 or 5 sd cards including 1 that works in another unit.
Cheers
I had the same message with a card of the right recommended type and brand. I formatted it on the pc and can happily use it since
Select to expand quoteULF said..
You can't have a card bigger than 2 gb.
Not that it really matters with a Phantom
Thanks guys,tried a few different cards and( formatting options)including one that has worked for 3 years in another gt 31.
I will keep persevering.
I had a similar problem with a new GT 31. Ended up being a fault with the unit and had to send it to locosys to get it fixed. Contact them, they give a good service.
Select to expand quoteULF said..
You can't have a card bigger than 2 gb.
Champion! that was the solution,many thanks!
Select to expand quotesnides8 said..ULF said..
You can't have a card bigger than 2 gb.
Champion! that was the solution,many thanks!
If you have managed to find one less than 2gb let us know where you found it! (If purchased recently)
Select to expand quoteWindxtasy said...snides8 said..ULF said..
You can't have a card bigger than 2 gb.
Champion! that was the solution,many thanks!
If you have managed to find one less than 2gb let us know where you found it! (If purchased recently)
Got it from the camera house on the cappuccino
Strip in freo.
It was a 2 gig card, they are getting hard to find now.
