Forums > Windsurfing   Gps and Speed talk

Whats the latest reccommended gps - GT31?

Reply
Created by Waiting4wind > 9 months ago, 19 Jun 2012
Waiting4wind
NSW, 1871 posts
19 Jun 2012 5:03PM
Thumbs Up

My trusty Garmin finally died on the weekend.

Whats the latest reccommended GPS unit for speed sailing? GT 31 ?

Is there anything around with a large display like the Garmin Fortrex that I had? I could set the Gartmin up with full screen display so I could see actual speed while sailing. Not overly useful but interesting nevertheless!

I assume that I can set up the 31 to show max speed on the display?

Mobydisc
NSW, 9029 posts
19 Jun 2012 8:56PM
Thumbs Up

Hi Des,

yeah the GT-31 is the GPS to get. Its not perfect. My old GT-11 which is very similar, finally died due to corrosion a few weeks ago. I'm sticking my GT-31 in a plastic sealed bag inside the pouch.

The Navis have Speed Genie which can display maximum speed as well as a few other speed categories. I like the 10 second speed average as that gives a better idea of what will be coming up on the screen at night.

CYA

decrepit
WA, 12390 posts
19 Jun 2012 6:58PM
Thumbs Up

With Tom's latest firmware, you can set up "speed genie" in a number of ways. I have mine cycling between last run max, last run 10s, session max and session 10 sec max.

evets
WA, 685 posts
22 Jun 2012 9:48PM
Thumbs Up

OK so I have set up my new GT31 with what I think is the latest software: V1.4(B0803T) but with this I do not have the keylocked function (2 buttons pressed at the same time which I get on the V1.3(B1123) version)
Is keylocked no longer a function?

redsurfbus
304 posts
22 Jun 2012 10:19PM
Thumbs Up

hold down the toggle button for a couple of seconds to keylock it.

evets
WA, 685 posts
22 Jun 2012 11:17PM
Thumbs Up

Hi RSB. Yup that is what I do. On the V1.3 B1123 loaded GT31 that works fine. On the newer one I have now loaded with V1.4 B0803T software holding down the toggle or both buttons just results in the message 'ACQUIRING SIG'

lao shi
SA, 1313 posts
23 Jun 2012 12:37PM
Thumbs Up

evets said...

Hi RSB. Yup that is what I do. On the V1.3 B1123 loaded GT31 that works fine. On the newer one I have now loaded with V1.4 B0803T software holding down the toggle or both buttons just results in the message 'ACQUIRING SIG'


Settings> Hold Key>Key Lock (default is Mark which I think sets a waypoint)

Herbylyn
QLD, 214 posts
23 Jun 2012 6:49PM
Thumbs Up

Evets, You have to go into Settings...find Key Lock ...and choose Key Lock.

evets
WA, 685 posts
24 Jun 2012 9:58AM
Thumbs Up

thanks Mark and Herby. I have now got that working. Funny thing is I was told about 2 years ago to lock you push in both buttons. Bit fiddly but it works.... knowing now that I only need to hold in the toggle button will make it a lot easier!

Windxtasy
WA, 4015 posts
24 Jun 2012 3:41PM
Thumbs Up

evets said...

thanks Mark and Herby. I have now got that working. Funny thing is I was told about 2 years ago to lock you push in both buttons. Bit fiddly but it works.... knowing now that I only need to hold in the toggle button will make it a lot easier!



Unfortunately it also makes it easier to do it inadvertently, such as when leaning against the board when moving your mast base.
I locked mine before I was aware a key lock function existed and was wondering why I was getting no response to any buttons I pressed!

redsurfbus
304 posts
25 Jun 2012 8:55PM
Thumbs Up

I have a small cut of neoprene glued around the toggle to stop any accidental pressing

pepe47
WA, 1381 posts
18 Jul 2012 10:34AM
Thumbs Up

redsurfbus said...

I have a small cut of neoprene glued around the toggle to stop any accidental pressing


I have a small rubber o-ring which does much the same thing. (purchased from a cheap auto spares shop)

tonyd
QLD, 399 posts
18 Jul 2012 5:13PM
Thumbs Up

Just on the firmware. Anyone know how to reset history max?

decrepit
WA, 12390 posts
18 Jul 2012 7:58PM
Thumbs Up

click while in max speed, scroll up or down to "clear" click on that.
Then go to max average, click on that,same process.
Won't work while it's scrolling thru the history panes.

lao shi
SA, 1313 posts
18 Jul 2012 10:20PM
Thumbs Up

tonyd said...

Just on the firmware. Anyone know how to reset history max?


Or (assuming GT31 latest firmware) in speed (in the speed menu) depress the toggle button and delete all will clear all your speed genie data.

tonyd
QLD, 399 posts
19 Jul 2012 7:54AM
Thumbs Up

lao shi said...

tonyd said...

Just on the firmware. Anyone know how to reset history max?


Or (assuming GT31 latest firmware) in speed (in the speed menu) depress the toggle button and delete all will clear all your speed genie data.


Got it. Thanks guys



Subscribe
Reply

Forums > Windsurfing   Gps and Speed talk


"Whats the latest reccommended gps - GT31?" started by Waiting4wind